Step-by-Step Block Paving Guide


Whether you’re decorating your garden or re-doing the driveway, it can be extremely helpful to know how to lay block paving. By taking the Do It Yourself technique, you can produce precisely what you desire and save yourself a reasonable amount of cash– something your bank balance will most likely thank you for. All you have to do is obtain the right equipment and read this guide.

Plan How You Want It

The very first step is to determine exactly how you desire your block paving to look. If you’re changing old paving, what didn’t you like concerning it? What renovations could you make? You should think about the overall shape, useful elements (such as dimension) and pattern of the bricks. It’s likewise a great idea to consider what colour bricks will most ideal go with your house– you don’t desire anything to clash. www.eks-construction.co.uk


Next, you’re going to wish to prepare the site. Mark out an area and dig it out, ensuring to dig far enough down so that your paving will be despite having the surrounding surface area. For this, you ought to use plant equipment such as a miniature excavator or a JCB.

Create The Sub-base

Develop a sub-base to create the structures of your block paving. Your sub-base should go to least 100mm thick, and it can be a smart idea to put it above a layer of weed-fabric, to stop weeds from expanding with your pavement. Finish your sub-base by going over it with a vibrating place. This will certainly squash it down and level it.

Put Down Edge Restraints

Place edge restrictions down to mark out the edge of your paving. They should be firm and also encouraging as the external area is the weakest part of the paving. They will likewise work as an overview for the shape of your block paving.

Begin Screeding

Next, you’ll should screed the location, including in the structures and making a degree surface for the paving to rest on. Place about 50mm of slightly damp sharp sand down and use a shaking plate once more to smooth and set. Then take down a 2nd layer, just the same as the first.

Lay Down The Bricks

Finally, you could begin setting down your bricks. For the very best surface, start at the end of a slope and go up. The joints of the bricks should overlap– similar to in a wall– so you’ll be left with voids that you’ll have to fill in with cuts of brick. As soon as your block paving is down and all the brick are appropriately positioned, sweep some kiln dried sand over the surface area. This will certainly load the gaps between the joints.

See, not also complicated! Block paving is really pretty very easy, and can offer you excellent outcomes if done right. As soon as you’ve completed, take your time to kick back as well as appreciate all your effort- you deserve it!